• 销售热线:孙经理13864073779
  •      郭经理 15866776295
  • 地址:济南北园大街东亚家居一层
  • 网址:www.jnxdsfwx.com
新闻中心当前位置:首页-新闻中心
    沙发维修都需要哪几个步骤吗?
    2020-11-13 14:49:55

    现如今,随着经济的发展,沙发维修行业发展越来越快,现在很多人在说到沙发坏了的时候都会选择维修,所以选择沙发维修的群体也是越来越多,但是你知道沙发维修都需要哪几个步骤吗?今天我们就一起来了解下吧。

    Nowadays, with the development of economy, the sofa maintenance industry is developing faster and faster. Now many people will choose to repair when the sofa is broken, so more and more people choose to repair the sofa. But do you know what steps are needed for sofa maintenance? Let's learn about it today.

    一,翻开,老沙发翻开时要坚持沙发的完整性,以便好装置,并且也在防止损坏漆膜和构成新的损坏,所以首要咱们需求仔细观察沙发的布局,在不一样的部件上标好序号,别的有些古旧民间家私制造时选用的布局与方法特别,致使拆装不行逆,此刻尽量不要进行拆装。

    1、 When opening the old sofa, we should adhere to the integrity of the sofa so as to make good installation, and also prevent damage to the paint film and the formation of new damage. Therefore, first of all, we need to carefully observe the layout of the sofa, and mark the serial number on different parts. Other ancient folk furniture has special layout and method when making, so that the disassembly and assembly can not be reversed. At this moment, try not to carry out it Disassembly.

    二,清洁,旧的沙发上有很多浮尘与积士,能够运用吹风机吹,有的部件上还有水泥浆,沥青等不要运用化学手法,能够用刀刮和打磨,在决议不保存原有漆面后,运用水洗,边冲刷边用特制的刷子刷,洗过的古旧家私需阴干一周以上

    2、 Clean. There are a lot of floating dust and accumulation on the old sofa, which can be blown by a hair dryer. Some parts still have cement slurry and asphalt. Don't use chemical methods. You can scrape and polish with a knife. After you decide not to save the original paint, wash it with water and brush with a special brush while washing. The washed old furniture needs to be dried in the shade for more than a week

             20121213175684438443.jpg

    三,去漆,通常是用细砂纸打磨,或用刀刮,但不能损坏原有的精雕有些。

    3、 To paint, usually with fine sandpaper grinding, or scraping with a knife, but can not damage the original carving some.

    四,选料和配料。这得看沙发自身的料质,是损坏的程度及有些,但是在沙发创新时,必定得同色,同纹的木材调配

    4、 Material selection and ingredients. This depends on the quality of the sofa itself, is the degree of damage and some, but in the sofa innovation, must be the same color, with the grain of wood deployment

    五,打磨。沙发漆面可直接用角磨机打磨,厚的桐油漆面需用喷灯烤化漆面后进行打磨;薄漆处可直接转入刮磨车间,用刮刀进行处置,打磨的要求是各部件打白到位,不留死角,不留表漆,油污,深浅共同

    5、 Grinding. Sofa paint surface can be directly polished with angle grinder, thick tung oil paint surface needs to be burnished after burnishing with blowtorch; thin paint can be directly transferred to the scraping workshop for disposal with scraper. The requirement of polishing is to whiten all parts in place, leaving no dead corner, no surface paint, oil stain and the same depth

    六,拼板。板上胶后,拼接,弯板进行调直,拼接后的板要用卡子固定加压常温需坚持4--8小时

    6、 Jigsaw puzzle. After gluing, the plates are spliced and bent for straightening. The spliced plates should be fixed with clips and pressurized for 4-8 hours at normal temperature

    七,试装,拼装。

    7、 Try and assemble.

    八,做漆面或装修。做漆面并不是说刷漆而是要尽能够保存本来的漆面,而作为清水木色的旧沙发擦蜡即可,当然有的也需求刷漆,通常情况下,头道漆后,后边还要上四到五道面漆。

    8、 To paint or decorate. To do paint is not to brush paint, but to preserve the original paint surface as far as possible, and as clear water wood color of the old sofa wipe wax can, of course, some also need to brush paint, usually after the first coat of paint, the back also need four or five finish.

    九,配铜活。有的沙发上面的铜坏了,所以得重新装置一个新的,如吊牌,面叶,活页等都是不行的。

    9、 With copper work. The copper on some sofas is broken, so it is necessary to install a new one, such as tags, face leaves, loose leaves, etc.